Lotus 6" Square Regressed Plenum Rated 18W LED


Dimmable. Energy Star and T24 Certified. cULus approved. Pot light housing not required. IC rated for direct contact with insulation. Air-tight and damp location approved. 5 & 10 year warranties.

Lotus 6" Square Regressed Plenum Rated 18W LED

  • Fully Dimmable
  • cULus Listed, Energy Star and T24 Certified
  • Type IC Rated – Approved for Direct Contact with Insulation
  • Air-Tight, Damp Location, Insulated and Non Insulated Ceilings
  • Open Plenum Approved
  • Superb Light Quality with CRI 92
  • Warranty: 10 Year on Residential, 5 Year on Commercial Installations
  • Junction Box Included – No Additional Hardware Needed



We recommend LED/CFL dimmers that have a low range adjustment dial. After all fixtures are connected to the dimmer adjust the dial to the lowest position before the lights start to flicker of shut down. This setting depends on the local voltage and number of fixtures per dimmer.
For a typical LED dimmer rated for 150W LED load the maximum number of fixtures per dimmer is 30.

Connecting the Driver

Open the cover of the junction box. Push and remove the knockout on the side plate. Install standard L16 cable connector. Insert line voltage feed into the cable connector and splice same colour wires using the included quick connectors. Close the cover. Connect the driver to the light fixture – the arrows on the male and female parts of the connector between the driver and the fixture should match. Tighten the connector by hand.

Locating the Driver

Locate next to the fixture – run line voltage wiring to first junction box and “daisy chain” to the junction boxes of the other fixtures.

Or install all drivers at one location and use low voltage extension cables to the fixtures. Use only extensions provided by the manufacturer. Available jumper cables are 10 feet (3m) – cat # EXC10. Cables are linkable.

Maximum run should not exceed 40 feet (12m).

Light Color

Warm White 2700K is yellowish, similar to halogen and incandescent light. Creates soft, calming feeling. We recommend the Warm White for bedrooms.

Soft White 3000K is a bit whiter and brighter than 2700K and the preferred choice of most of the customers. We recommend the Soft White for living rooms and kitchens with warm coloured countertops and cabinets.

Neutral White 4000K is whiter, colder and more energizing light. Using this colour will make the room look white, modern and brighter. We recommend the Neutral White for bathrooms, offices and work areas, garages, kitchens with white or dark countertops and cabinets.



Suitable for damp locations.
Not suitable for steam showers, saunas and outdoor locations where directly exposed to rain.

  • 6″ square front plate (171 mm); Thickness 1 1/2″ (38 mm)
  • Cut out: 6 5/16″ +/- 1/8″ (160 +/- 3 mm)
  • Junction Box Dimensions (with driver inside): 3 5/16″ (85 mm) x 3 5/16″ (85 mm) x 1 1/8″ (32 mm)

Ships within: Two Business Days.

Note: Lotus orders over $500 ship for free. For orders less than $500, US Lotus orders are charged a $15 USD flat shipping rate and CA Lotus orders are charged an $18 CAD flat shipping rate.

Customer Reviews

No reviews yet

Related products

View all
Lotus 6" Slim Gimbal Regressed LED - tinylifesupply.com
Lotus 3" Gimbal Recessed LED - tinylifesupply.com
Lotus 3" Round Eyeball Gimbal LED
From $45.33
Lotus 2" Slim Gimbal Recessed LED - tinylifesupply.com
Lotus 2" Round Eyeball Gimbal LED
From $38.67
Lotus 6" Round LED 12W Superthin - tinylifesupply.com
Left Continue shopping
Your Order

You have no items in your cart