Cubic Metal Roof Flue Exit Kit
This kit is designed to exit Cubic Wood Stove flue systems. Not limited to metal! Ideal for applications such as van’s, skoolie’s, RV’s, tiny homes etc.
This kit is made to accommodate roofs such as corrugated and ribbed metal. It can accommodate a pitch of up to 45 degrees.
1 x 24” long 5” Insulated pipe or 2 x 12” long 5” Insulated pipes
1 x 5” ceiling trim plate
2 x support brackets
1 x Metal roof flashing (DFE104B) Dektite Premium #4
1 x Stainless steel rain cap
1 x 3"-5" Adapter
Things to consider to complete your set up:
The 3” pipe does not come with this kit.
The 3” pipe goes through the 5” insulated pipe (like a sleeve). It does not stop where the 5” pipe begins.
The 5” insulated pipe starts 2” below your ceiling and goes 1’ above the highest point of the roof. If you need more than 24” of insulated pipe you would need to acquire extra sections.
The 3” pipe goes from the top of the stove to the same 1' mark above the highest point of the roof where the 5” pipe terminates.
Note: This kit includes only the items required to exit a Cubic Flue System safely through a roof. This kit does not come with the 3" Cubic Double Wall Stainless Steel Pipe required between the top of your Cubic wood stove and the Transitional Adapter at the bottom of this exit kit. You may also need additional insulated pipe depending on the thickness of your roof and the required height of your chimney cap. This kit only works with Cubic Mini Wood Stove flue systems.